Tech Articles - Page 7 of 14 - Papermart

Papermart

Category : Tech Articles

Tech Articles offers a look at what the industry experts have to share about the latest innovations and products designed for the pulp and paper industry.

Tech Articles

Single Point Kappa Measurement Gives Double-sided Savings

admin
BTG’s online Kappa analyzer at Green Bay Packaging’s Arkansas Kraft Division permits Kappa number and pulp yield increases plus improved runnability on the containerboard machines. Mark Williamson, Journalist Engineer Papermakers in an integrated kraft containerboard mill know very well they have to adapt their papermaking operations to compensate for incoming......
Tech Articles

Innovations in Steam systems in Pulp and Paper industry

admin
Qualifications: Master of Technology, Indian Institute of Technology, Mumbai, India Technical Specialization: Steam engineering, Two phase flow, thermal & Fluid dynamic aspects of plant design including Automation and Instrumentation packages Abstract The objective of any Utility manager in a Pulp and Paper mill is to minimize his losses, whether in......
Tech Articles Case Study

ANAEROBIC TREATMENT OF RECYCLED PAPER MILL EFFLUENT WITH THE INTERNAL CIRCULATION REACTOR

admin
W.J.B.M. Driessen*, L.H.A. Habets Paques B.V., P.O. Box 52, 8560 AB Balk, The Netherlands Abstract Anaerobic effluent treatment using the UASB (Anaerobic Upflow Sludge Bed) process has been used on a large variety of effluents from the pulp and paper industry. Newly developed sludge bed reactors which allow higher upflow......
Tech Articles

Basic Design Parameters Towards Optimisation of Performance on Wire Table

admin
R K Agarwal, M R MAC-TECH PVT LTD The content of this discussion is based on the vast study and experience on various Paper Machines and includes the references from the studies of various experts from the Industry. One of the most requested improvements from papermakers is to help to......
Tech Articles

Water Conservation to Clarify the Reject of Centricleaner Effluent

admin
The latest technology Sedicell is based on Sedimentation cum flotation technology With the combined use of Sedicell and Spray Filter, consumption of water is reduced to almost 10 m3/tonne of paper A successful installation has been done in Bindal Paper, Muzaffarnagar to arrest the dead fiber coming out of the......
Tech Articles Uncategorized

PAPCEL, a.s., Czech Republic: Recycling Liquid Packaging Boards

admin
The copmany has developed specialised LPB-processing lines for two basic capacities of 20 – 25 tons and aprox. 50 tons input material per day Liquid Packaging Boards (LPB), often wrongly called Tetrapak, which is actually the name and the registered trademark of their best known producer, significatly exceed the other......
Tech Articles

Superb Technologies for Water Treatment & Resource Recovery

admin
World Water Works specializes in the combination of Moving Bed Biofilm Reactor (MBBR) technology, Dissolved Air Flotation & DEMON® technology for advanced wastewater treatment World Water Works is a manufacturer of specialized process and waste water treatment technologies focused on performance, flexibility and longevity designed to yield clean water and......
Tech Articles

POLYCUP RECYCLING: James Cropper Speciality papers unique experience producing luxury boards with recycled pulp from Poly-cups

admin
MATTHEW MILLER & ALAIN LASCAR James Cropper UK & KADANT France Poly-cup grades are a very challenging raw material. James Cropper Speciality papers target was to recycle poly-cups, getting very clean fibers to replace virgin pulp in their luxury board. James Cropper selected Kadant to build their recycling line. This......
Tech Articles

For Efficient Suction Roll Operations

admin
An outline for a DMAIC/Six Sigma project related to energy savings and increased run-times from more efficient suction roll operations. Almost every paper machine has at least one suction roll, and some have as many as five, plus spares. They are a critical path element in the operation of the......